Buyer guides
Choosing the right engine, set or pump
Seven guides written from our own catalogue data. Each one states the question, gives the short answer first, then shows the specification table and the selection steps behind it.
- 01How to Choose a Diesel Generator for Farm, Shop and Construction UseA buyer needs standby or site power and is offered sets described only by a kW figure. Two sets with the same rating can differ in starting capability, frequency, fuel consumption and weight — and the kW figure alone does not say which one fits the job.
- 02GX160 vs 186F: What Buyers Should Check Before OrderingThe two designations are often listed side by side as if they were alternatives. They are not the same kind of engine: GX160 is a petrol engine of about 163 cc, and 186F is a diesel of roughly 406 to 418 cc depending on maker. Ordering one as a substitute for the other changes fuel, weight, starting and maintenance, not just power.
- 03EY20 Engine Replacement Guide: Dimensions, Output and CompatibilityAn EY20 has failed or is being discontinued on equipment that is otherwise sound, and a replacement is needed. The risk is ordering an engine that has the right power and the wrong shaft, which turns a repair into a re-engineering job.
- 04How to Choose a 2 Inch, 3 Inch or 4 Inch Water PumpPumps are sold by connection size, but the connection does not tell a buyer how much water will arrive at the outlet. A larger pump on the wrong head can deliver less than a smaller one on a short run.
- 05How to Choose a 5.5 HP Gasoline Engine for OEM EquipmentAn equipment maker needs a 5.5 HP engine in volume, and the first quotation usually quotes power and price only. The details that decide whether the machine works — shaft, mounting, tank position, starting — are settled later, by which time the frame is already welded.
- 06Water Pump Total Head vs Flow Rate: A Practical Buyer GuideCatalogues quote a maximum head and a maximum flow for each pump. Buyers add them together in their heads — “28 metres and 60 cubic metres an hour” — and then find the delivered flow is far below what they expected once the pipe run and lift are real.
- 07What to Check Before Buying a Chinese Engine ManufacturerSearch results and trading platforms present hundreds of suppliers with near-identical descriptions. The differences that decide whether a container arrives as specified are not visible in a product photo, and they are rarely settled by asking for a “best price”.
Contact
Tell us what you need
Send us your market, required output and configuration and we will come back with a suitable model and quotation. We reply to enquiries within one working day.
- Telephone
- 0086-18662020695
- Factory and office
- Yancheng Fujiheng Power Machinery Co., Ltd.
Teyong Industrial Park, Sheyang County, Yancheng, Jiangsu, China
Teyong Industrial Park, Sheyang County, Yancheng, Jiangsu, China
Open in Google Maps